There are many aspects that need to be paid attention to during the use of skid steer concrete crusher to ensure safe and efficient operation.
1. Equipment installation and connection
When installing the crusher on the skid steer loader, be sure to strictly follow the steps in the operating manual to ensure that the connection is firm and reliable. Check whether the bolts at the connection parts are tightened, whether the hydraulic pipelines and electrical lines are connected correctly and without leakage or looseness, to prevent the equipment from falling off or line failure during the operation.
2. Operator training
Operators must undergo professional training and be familiar with the various functions, operating methods and safety regulations of the equipment. Understand how to start and stop the equipment, how to adjust the crushing parameters, such as the opening of the jaw crusher or the speed of the hammer crusher. At the same time, it is necessary to understand the correct operation methods in different operation scenarios, such as the difference in operation when handling large concrete blocks and small crushed blocks.
3. Site survey and preparation before operation
Check whether there is enough space for the equipment to move and operate at the site, and clear the debris, obstacles and irrelevant personnel in the site. The distribution of steel bars in the concrete structure should be understood in advance, because the steel bars may cause great resistance to the crushing operation and even damage the crushing device. If necessary, the steel bars need to be pre-processed.
4. Equipment operation status
During the operation, always pay attention to the operation status of the equipment. Pay attention to the working condition of the crushing device, such as whether the jaw plate opens and closes normally, whether the hammer head rotates normally and has no abnormal shaking, etc. Monitor whether the pressure of the hydraulic system is stable, and whether there is abnormal heating or alarm signal in the electrical system. If the equipment has abnormal noise, vibration or other signs of failure, the operation should be stopped immediately for inspection and maintenance.
5. Safety protection measures
Operators should wear complete personal protective equipment, including safety helmets, protective glasses, earplugs, protective gloves and safety shoes, etc., to prevent concrete fragments from splashing and injuring people, noise from damaging hearing, and other unexpected situations from causing harm to the body during the crushing process. At the same time, ensure that the equipment's guardrails, protective covers and other protective devices are intact and installed correctly.
6. Equipment maintenance
Replace hydraulic oil, engine oil, filter and other consumables according to the prescribed time and requirements, check the wear of the crushing device, and replace the excessively worn jaw plate, hammer head or other vulnerable parts in time to ensure the performance and service life of the equipment, reduce the probability of failure, and ensure that each operation can be completed smoothly and safely.
If you are interested in learning about the precautions of skid steer concrete crusher, etc., welcome to visit www.vickwest.com! We have industry-leading technical dynamics and professional customer service, and look forward to working with you to create a better chapter!
