As an important gardening and agricultural tool, correct maintenance of skid steer brush cutter is essential to ensure its performance and extend its service life.
1. Cleaning work
Use a high-pressure water gun or brush to remove dirt, weeds, branches and other debris on the surface of the fuselage. Pay special attention to cleaning around the radiator and engine compartment to prevent debris accumulation from affecting the heat dissipation effect, which in turn causes engine overheating and damage.
2. Maintenance of blades
Check the wear of the blade regularly. When the blade is found to be blunt or notched, it needs to be polished or replaced in time. When polishing, professional tools should be used and the operation should be carried out at the correct angle and method to ensure the sharpness and balance of the blade. At the same time, add an appropriate amount of grease to the rotating shaft of the blade to reduce friction and extend its service life.
3. Maintenance of the engine power system
Regularly replace the engine oil, air filter and fuel filter according to the time and model specified in the equipment manual. The quality and quantity of the engine oil directly affect the operation of the engine. Make sure that the engine oil is within the appropriate liquid level range and has not deteriorated. If the air filter is clogged, the engine will not be able to intake air smoothly, reduce power output or even cause malfunctions, so it needs to be cleaned or replaced regularly.
4. Hydraulic system
Check the level and quality of the hydraulic oil, and replenish or replace it if necessary. Pay attention to check whether there is leakage in the hydraulic pipeline. Once a leak is found, the machine should be stopped and repaired immediately to prevent the system pressure from being insufficient due to hydraulic oil leakage, which will affect the normal operation of the brush cutter.
5. Connection parts of the whole machine
It is very important to check the connection parts of the whole machine, such as whether the screws are loose, whether the tension of the chain or belt is appropriate, etc. Loose screws may fall off during operation, causing damage to components or even causing safety accidents; and chains or belts that are too loose or too tight will affect the transmission efficiency and shorten their service life.
Regularly check the electrical system, including battery power, whether the wire connection is firm, etc. A good electrical system is the guarantee for the startup and operation of the equipment.
6. Placement
Finally, when the Skid Steer Brush Cutter is not used for a long time, store it in a dry, ventilated and covered place to avoid direct sunlight and rain erosion, so as to be fully prepared for the next operation.
Through the above comprehensive and meticulous maintenance measures, the brush cutter can always maintain a good working condition and provide stable and reliable services for various operations.
If you are interested in learning about the maintenance methods of the skid steer brush cutter, etc., welcome to visit www.vickwest.com! We have industry-leading technical dynamics and professional customer service, and look forward to working with you to create a better chapter!
