First, check the cause of the damaged screen mesh. The sieve mesh of a vibrating screen is a vulnerable component, and different screening materials have varying degrees of wear on the sieve mesh. During the continuous operation of the screening machine, the load on the screen mesh is quite large, which can cause damage to the screen mesh. It should be promptly detected and replaced during the production process. To ensure the quality of screened materials.
Next is the sealing degree between the circular vibrating screen frame and the screen body. The frame and body of the vibrating screen are sealed with sealing strips, commonly made of natural rubber and silicone. The sealing strip of the vibrating screen will deform or break after a period of use. It is recommended that users regularly check the condition of the sealing strip when using the vibrating screen, and replace it promptly if it is damaged.
*The movement trajectory of the material on the screen surface causes ineffective classification of small and large particles. Usually, this situation is mostly due to the angle of the vibration motor. Generally, the motor angle of the vibrating screen is adjusted to 65 degrees when it leaves the factory, and the motor angle can be adjusted according to the screening situation of the material during use. To change the trajectory of the material on the sieve surface. Improve the screening accuracy.
